What is Water Submetering? Here’s Your Guide.

Reading a community’s water bill is like trying to make an accusation halfway through a game of Clue.

You have limited cards in your hand. You might know it was Professor Plum who was killed, but was it with the Lead Pipe or the Candlestick? In the Conservatory or the Billiards room? You’re making assumptions, not drawing conclusions.

A water bill might show how much water the property used, but not which apartments used it, or where a change in consumption may need attention.


So what’s the key to solving the mystery? A water submeter.

Water submeters measure consumption at the apartment level, giving property teams a clear foundation for resident billing, water-use monitoring, and can guide discussions about energy conservation and utility costs. For teams evaluating a new system, or those explaining an existing one, these are the details you need in your hand to set the right expectations and determine the right processes.

What is a Water Submeter?

Water submeter: A secondary device installed on a water line that measures water supplied to a specific part of a property, typically an individual apartment. It sits downstream from the master meter, which records the community’s overall consumption.

Sitting downstream matters when evaluating your property’s billing approach. A ratio utility billing system, or RUBS, divides shared utility costs using a formula rather than individual meter readings.

Submetering allows measured usage to be the basis for a resident’s water consumption charge, whereas other permitted charges depend on applicable regulations and lease terms. 

For another perspective on individual utility measurement, check out our blog, Understanding Submetering: Student Housing’s Guide to Fair Utility Distribution.

How Submetering Works

As we established, a submeter connects each apartment’s measured water use to its consumption charges. Yet how does that process actually work?

  1. Water enters the property through the utility’s master meter.
  2. Individual submeters measure the water supplied to each apartment.
  3. Property owners or billing providers collect meter readings, through automated systems that transmit data from the submeter.
  4. Those readings are applied to calculate each resident’s water charges.

If a family of five is next-door neighbors to a man who lives alone, rather than treating those households as though their consumption is identical, a submeter records what each apartment actually uses, giving leasing and property teams a straightforward way to explain usage-based billing.

Water submeters are simple: they just measure the water. If you need to measure how that water is heated, that’s where submetered electricity comes in. Submetering electricity follows a similar principle, but requires different equipment and billing considerations. 

Let’s Talk Regulations

Regulations always seems to be an attention grabber when it comes to measuring and billing water usage, so let’s not waste any time. What regulations apply to water submetering?

As with all regulations, water submetering regulations vary by location, and may address whether submetering is permitted, required disclosures, and allowable charges.

Take the Public Utility Commission of Texas for example. They regulate submetered water billing and require participating property owners to register. The Commission also addresses lease disclosures and billing practices, though those requirements shouldn’t be treated as nationwide rules.

The best rule of thumb? Consult the relevant state government, public utility commission, or water utility before changing a billing method or evaluating your meter program.

It’s best practice to perform a regulatory review to inform your implementation and resident communications. You can learn more about this broader connection between submetering developments, billing transparency, and conservation in our blog, Substandard Submeters? Ditch the Subpar for the Superb.

Crunching the Numbers: How Much Does Water Submetering Cost, and What’s the ROI?

As budgeting season wraps up, costs of installation, implementation and maintenance is top of mind. Submetering might be an elective choice or a regulatory obligation, but knowing what it will cost and what to expect in terms of return on investment still factors into the decision.

Installation costs for a water submeter system depend on your property’s plumbing layout, meter selection, and the number of supply lines serving each apartment. If you take a look at EPA documentation on water metering, you’ll find that a single supply pipe per unit can make submetering less expensive than metering multiple water sources entering the same apartment.

A realistic investment review looks beyond equipment costs, such as

  • Plumbing modifications and installation.
  • Ongoing maintenance and meter performance.
  • Reading collection and billing administration.
  • Potential water savings and improved consumption visibility.

Be careful when considering a water submeter as a guaranteed reduction in utility expenses, as results depend on resident behavior, water rates, and how teams respond to consumption data (having the data versus actually doing something with it). The same care should also be applied to leasing conversations. Residents may reduce their usage-based charges by using less water, but rates and other permitted charges can still affect the total bill.

Before Submeter Installation, Consider This

Water submeter installation begins with a review of the building’s plumbing system, selecting suitable meters. This helps determine where your submeters belong and whether an apartment needs more than one. 

Proper installation matters. Inaccurate readings can lead to incorrect billing. Before work begins, establish and inform residents:

  • Whether installers will need access to apartments.
  • Whether water shutoffs will be necessary.
  • When meter readings will be reflected in billing.
  • Where the billing method and applicable charges will be explained.

You should treat installation and billing activation as related but separate milestones. A clear schedule helps maintenance, leasing, and billing teams communicate consistently.

Explaining Submetered Water Bills to Residents

A successful rollout is exemplified by resident response. Residents need to understand what changed, and how that impacts them, specifically how their charges are now being calculated. Be prepared to send out clear and urgent announcements to communicate service dates, explain the new process of recorded consumption and calculation methods, as well as any sewer or other permitted charges.

These communications should already align with your lease terms and any applicable rules.

When a resident questions a higher bill, begin with a practical question. Did their recorded consumption increase, or did a rate or other charge change? That distinction can help direct the review, as it could be an issue of meter readings, billing calculations, or a possible maintenance problems, such as running toilets or dripping faucets.

Does Water Submetering Help Properties Conserve Water?

In theory, yes. Water submetering supports conservation by making your property’s consumption more visible. A national study cited by the Building America Solution Center found that submetered apartments used approximately 15% less water than unmetered apartments, though that is not a guaranteed outcome for every community.

For property teams, real conservation lies in acting on the information your submeters provide to save money on a bigger scale. While a water submeter can’t fix a running toilet, it can help bring the problem into view before it becomes a more expensive repair.

Submeters Bring Greater Clarity to Water Management

Water submetering is your connection between individual consumption and usage-based billing. Submeters give property teams more visibility into water use, and its value depends on thoughtful planning. Consider your current plumbing program, a proper installation plan, billing compliance, and clear resident communication in your decision to implement submetering.

For sales and property management teams, that creates a stronger foundation for explaining utility charges and managing questions with confidence. Contact Conservice to learn more about water submeters and how they can fit into your community’s utility management approach.

Allie Catmull

Allie Catmull

Allie is the Content Strategist at Conservice, who thinks utility management is all the rage. She loves reading, writing movie reviews, illustrating books for her nieces and crushing foot races with her nephew.

Subscribe To Our Blog Newsletter

Keep yourself ahead of the curve with the latest utility news, trends, & resources.

Editor's Picks

Affordable Housing Utility Programs: HUD Allowances and LIHTC Compliance

November 16, 2026

A resident budgets for rent each month, but the electric bill leaves a little less room for groceries than it did last year. At the property office, your team is reviewing the utility allowance that accounts for those costs in…

Ask An Expert: With Sustainability Expert Jason Krychiw

November 12, 2026

Meet Jason Krychiw Jason Krychiw started his career in the research camp. Yet somewhere between studying biofuels and environmental impacts, he found himself drawn to work with a more direct human impact. That need for purposeful work led him to…

Don’t Mistake AI for Automation: A Primer for Property Management

November 4, 2026

At October’s Rent Manager User Conference, a speaker asked a room of property management professionals a simple question:  “How many of you track the late fees you’re paying on utility bills?”  In a room packed with dozens and dozens of…

More Doors = More Moving Parts: Growing Utility Management with Your Portfolio

October 30, 2026

More Doors = More Moving Parts: Growing Utility Management with Your Portfolio It’s alive! The multifamily market is alive! The industry’s biggest property managers have developed a serious appetite for growth. This year’s rankings show just how many doors they’ve added.…

The State of Manufactured Housing in 2026

October 27, 2026

The State of Manufactured Housing in 2026 | RSS.com In 2024, we said manufactured housing was parking itself at the intersection of innovation and resilience. Two years later, the industry has A LOT more traffic to manage. Demand for manufactured…

Utility Theft Detection: Protecting Revenue with Smart Monitoring

September 24, 2026

What does a case of “utility theft” even look like? A broken meter? A cyber attack? Someone hotwiring an electric panel like it’s some kind of car? Utility theft is a broad term for a simple concept—the loss of recoverable revenue to undetected utility use.  This can include physical meter tampering, missed service transfers, account…

The Only 5 Utility Management Companies Worth Considering in 2026

September 23, 2026

The multifamily utility market has no shortage of providers. But only a handful offer the scale, service depth, technology, or specialization to deserve serious consideration in 2026. Five stand out: Conservice (unashamed plug, but true is true), RealPage, Yardi, Entrata, and Zego. Each brings a different strength to the table. Some embed utilities directly into…

Why Should You Centralize Your Utility Management?

September 22, 2026

TL;DR Ever hear the saying “you need to get your ducks in a row”? That can be a difficult ask when those ducks are running in different directions, across multiple states. Some are even hiding from you, with a few practically kidnapped by strangers, turning duck management into a wild goose chase. Unfortunately, we’re handling…

Broadband Summit 2026 Debrief: The Infrastructure of Connectivity

September 18, 2026

Telecom strategy used to be limited to a few baseline questions: Who is the provider? What speeds do they offer? And are they offering the best rate? That was often the extent of the decision-making process. Walking out of Broadband Summit 2026, one thing was clear: those questions aren’t enough anymore. Internet has outgrown the…

Rental Junk Fee Laws in 2026: What Utility Billing Teams Need to Know

September 14, 2026

TL;DR: Fee transparency law is tightening in 2026, and most of the new rules target disclosure, not the formulas billing teams use to calculate a utility bill-back. This guide breaks down what counts as a junk fee, where disclosure rules end, and billing accuracy begins, the laws currently in effect, and practical steps to keep…

Experience Effortless Utility Management and Cost Savings

Connect with us today to discover how our solutions can ease tenant billback, streamline utility management, and reduce your costs and energy usage. Make your utility management smarter and more efficient with Conservice!